Angle Globe Valve Manufacturers in Nigeria

42, Local Airport Road Ikeja, 300001, Lagos, Nigeria.
Posted on 21 May 2024 / 12
Location : Ahmedpur East
Condition : Brand New

African Valve is the topmost Angle Globe Valve Manufacturers in Nigeria. Angle Globe Valve is a customized globe valve with inlet and outlet at right angles. These valves are installed in lines with complicated pipe structure or pressure drops. The basic structure of this valve is the same as that of a globe valve, however they differ mainly in the direction of fluid flow since the fluid in the angle valve performs a 90° rotation. These valves are installed in lines with complicated pipe structure or pressure drops. Angle Globe Valves come with pressure-seal or bolted bonnets, depending on the line pressure.

The opening and closing sections of an angle globe valve are plug-shaped valve discs, the sealing surface is flat or conical, and the flap travels linearly down the fluid’s center. This Globe valve’s ends are at a 90-degree angle, and fluid flow happens with a single 90-degree rotation. Their flow rate is much lower than that of oblique-style globe valves. They are commonly used in applications that include cycles of moving flow because of their capacity to withstand the crushing effect of this type of flow.


  • Body

  • Disc or Plug

  • Seat

  • Stem

  • Bonnet

  • Yoke

  • Actuator


Advantages of Angle Globe Valve:

  • Precise Flow Control

  • Tight Shut off

  • Ability to change the direction of fluid flow by 90 degrees

  • Compact Design

  • They can handle a wide range of fluids.

  • Reduced Pressure Drops



  • Petrochemical and Chemical Industries

  • Oil and Gas Production and Refining

  • Power Generation (including fossil fuel and nuclear power plants)

  • Water and Wastewater Treatment

  • Pulp and Paper Manufacturing

  • Marine and Shipbuilding

  • Mining and Mineral Processing

  • Aerospace and Defense

  • Automotive Manufacturing

  • Steel and Metal Processing

  • Renewable Energy (e.g., solar and geothermal power plants)



  • Body Material : Cast Iron , Cast steel , Ductile Iron, AISI SS 304,316,316L,317,317L

  • Size Range: 2 inches to 18 inches

  • Pressure : Class150 to Class1500, PN10 to PN64

  • Ends: Flanged, Buttweld, Socket weld, Threaded

  • Operations: Handwheel operated, Gear Operated , Electric Actuated and Pneumatic Actuated


Visit us:

There are no reviews yet, why not be the first?
Leave a review
Criteria 1: Criteria 2: Criteria 3:

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Listings